Optimization of cutting process of medium density fibreboards by the abrasive water-jet

Autor: Barcik, Štefan
Matična publikacija: Drvna industrija (2011)

Effect of technological parameters and wood properties on cutting power in plane milling of juvenile poplar wood

Autor: Barcik, Štefan
Matična publikacija: Drvna industrija (2008)

Influence of selected factors on granulometric composition of chips in plane milling of juvenile pine wood

Autor: Barcik, Štefan
Matična publikacija: Drvna industrija (2005)

Influence of specific pressure on cutting power and wood removal by disc sander

Autor: Samolej, Anton
Matična publikacija: Drvna industrija (2006)

Primjena i analiza informacijskog sustava u tvrtci za preradu drva

Autor: Aláč, Patrik
Matična publikacija: Drvna industrija (2010)

The influence of cyclic loading on ultimate bending strength of beech solid and laminated wood

Autor: Gaff, Milan
Matična publikacija: Drvna industrija (2014)

Shrinkage of grand fir wood and its variability within the stem

Autor: Lukášek, Jiŕi
Matična publikacija: Drvna industrija (2012)

Investigation of temperature fields in the air environment above wood subjected to thermal degradation = Ispitivanje temperaturnih polja u zraku iznad drva podvrgnutoga toplinskoj...

Autor: Pivarčiova, Elena, Barcik, Štefan, Štefková, Jaroslava, Škultéty, Emil
Matična publikacija: Drvna industrija (2019)

Investigation of temperature fields in the air environment above wood subjected to thermal degradation : Ispitivanje temperaturnih polja u zraku iznad drva podvrgnutoga toplinskoj...

Autor: Pivarčiova, Elena, Barcik, Štefan, Štefková, Jaroslava, Škultéty, Emil
Matična publikacija: Drvna industrija (Online) (2019)

Formaldehyde emission from wood-based panels bonded with different formaldehyde-based resins

Autor: Salem, Mohamed Z. M.
Matična publikacija: Drvna industrija (2011)

The impact of design parameters of a horizontal wood splitter on splitting force

Autor: Kováč, Ján, inženjer
Matična publikacija: Drvna industrija (2014)

Studies on mechanical properties of composite materials based on thermo modified timber

Autor: Razumov, Evgeny Y.
Matična publikacija: Drvna industrija (2013)

14th Symposium "Danubia-Adria" on Experimental Methods in Solid Mechanics, Poreč, October, 2 - 4, 1997.

Impresum 1997

Nove tehnologije i materijali u industrijama baziranim na sektoru šumarstva : zbornik radova : 18. međunarodno znanstveno savjetovanje, Zagreb, 19. listopada 2007.

Autor: Grbac, Ivica
Impresum 2007

18th International Scientific Conference New Technologies and Materials in Industries based on the Forestry Sector, Zagreb, 19th of October 2007 : proceedings

Autor: Grbac, Ivo
Impresum 2008