Microstructural investigation of the heat-affected zone of simulated welded joint of P91 steel

Autor: Vuherer, Tomaž
Matična publikacija: Metalurgija (Sisak) (2013)

Suitability of heat treatment for crack resistance of material in the connection part of heavy transporter for liquid slag

Autor: Vuherer, Tomaž
Matična publikacija: Metalurgija (Sisak) (2014)

Behaviour of coarse grain heat affected zone (HAZ) during cycle loading

Autor: Vuherer, Tomaž
Matična publikacija: Metalurgija (Sisak) (2012)

Fatigue crack initiation from microstructurally small vickers indentations

Autor: Vuherer, Tomaž
Matična publikacija: Metalurgija (Sisak) (2007)

Acceptability of residual stresses measurement methods of butt weldments and repairs

Autor: Vuherer, Tomaž
Matična publikacija: Strojarstvo (2009)

Dependence of hardness and impact energy on cooling time Δt8/5 and temperature for S960QL

Autor: Samardžić, Ivan, Dunđer, Marko, Vuherer, Tomaž
Matična publikacija: Metalurgija (Sisak) (2015)

Weldability investigation steel P 91 by weld thermal cycle simulation

Autor: Dunđer, Marko, Samardžić, Ivan, Vuherer, Tomaž
Matična publikacija: Metalurgija (Sisak) (2015)

Resistivity during cycle loading of fine grain heat affected zone (HAZ) of 17CrNiMo7 steel prepared into laboratory furnace

Autor: Smaili, F., Vuherer, Tomaž, Samardžić, Ivan
Matična publikacija: Metalurgija (Sisak) (2019)

Weldability prediction of high strength steel S960QL after weld thermal cycle simulation

Autor: Dunđer, Marko
Matična publikacija: Metalurgija (Sisak) (2014)

Impact energy analysis of quenched and tempered fine grain structural steel specimens after weld thermal cycle simulation

Autor: Dunđer, Marko
Matična publikacija: Metalurgija (Sisak) (2014)

Weldability of microalloyed high strength steels TStE 420 and S960QL

Autor: Dunđer, Marko
Matična publikacija: Metalurgija (Sisak) (2014)

Weldability investigation of TStE 420 after weld thermal cycle simulation

Autor: Dunđer, Marko
Matična publikacija: Strojarstvo (2010)

Potential fatigue strength change of welds due to repair welding

Autor: Gliha, Vladimir
Matična publikacija: Strojarstvo (2009)

Influence of vibrations on residual stresses distribution in welded joints

Autor: Samardžić, Ivan, Vuherer, Tomaž, Marić, Dejan, Konjatić, Pejo
Matična publikacija: Metalurgija (Sisak) (2015)

Numerical-experimental analysis of the foldable containers strength

Autor: Čelović, Sevket, Tipsarević, Miloš, Maneski, Taško, Vuherer, Tomaž, Kozak, Dražan
Matična publikacija: Tehnički vjesnik (Strojarski fakultet) (2015)

Application of semantic technology for calculation of welding time in the development of new products

Autor: Stropnik, Ambrož, Vuherer, Tomaž, Samardžić, Ivan, Zorman, Milan
Matična publikacija: Tehnički vjesnik (Strojarski fakultet) (2017)

Influence of kinematic factors of friction stir welding on the characteristics of welded joints of forged plates made of EN AW 7049 A aluminium alloy

Autor: Perović, Milenko, Baloš, Sebastian, Kozak, Dražan, Bajić, Darko, Vuherer, Tomaž
Matična publikacija: Tehnički vjesnik (Strojarski fakultet) (2017)

Fatigue crack growth and fracture mechanics analysis of a working roll surface layer material

Autor: Drobne, Matej
Matična publikacija: Metalurgija (Sisak) (2014)

In-service damage of railway steel axles

Autor: Yasniy, Oleh
Matična publikacija: Tehnički vjesnik (Strojarski fakultet) (2011)

The finite element analysis of kinetic energy absorbers for railway vehicle

Autor: Atanasovska, Ivana
Matična publikacija: Strojarstvo (2012)