Proračun svezanih elektromagnetskih polja i pomaka strukture primjenom metode konačnih elemenata

U ovom magistarskom radu analizira se rad elektromehaničkih pretvarača energije (aktuatora). Pritom se razmatraju se tri pristupa. Prvi pristup koristi elektromehanički model pretvorbe energije s koncentriranim parametrima. U tom modelu aktuator je prikazan crnom kutijom unutar koje se bez gubitaka...

Full description

Permalink: http://skupni.nsk.hr/Record/fer.KOHA-OAI-FER:14925/Details
Glavni autor: Topolnik, Marko (-)
Ostali autori: Štih, Željko (Thesis advisor)
Vrsta građe: Knjiga
Jezik: hrv
Impresum: Zagreb : M. Topolnik ; Fakultet elektrotehnike i računarstva, 2000.
LEADER 04169nam a2200241uu 4500
005 20190405135705.0
008 s2000 ci a |||||||||| ||hrv|d
035 |a HR-ZaFER 16544 
040 |a HR-ZaFER  |b hrv  |c HR-ZaFER  |e ppiak 
041 |a hrv 
080 |a 537.8  |h Elektricitet. Magnetizam. Elektromagnetizam  |j ELEKTROMAGNETIZAM. ELEKTROMAGNETSKO POLJE..ELEKTRODINAMIKA. MAXWELOVA TEORIJA.  |e 537  |9 2675 
080 |a 681.527.2  |j ELEKTROMEHANIČKI SISTEMI UPRAVLJANJA  |9 1924 
100 1 |9 18273  |a Topolnik, Marko 
245 |a Proračun svezanih elektromagnetskih polja i pomaka strukture primjenom metode konačnih elemenata :  |b magistarski rad /  |c Marko Topolnik ; [mentor Željko Štih] 
260 |a Zagreb :  |b M. Topolnik ; Fakultet elektrotehnike i računarstva,  |c 2000. 
300 |a 86 str. :  |b ilustr. ;  |c 30 cm +  |e CD 
504 |a Bibliografija str. 73. 
520 |a U ovom magistarskom radu analizira se rad elektromehaničkih pretvarača energije (aktuatora). Pritom se razmatraju se tri pristupa. Prvi pristup koristi elektromehanički model pretvorbe energije s koncentriranim parametrima. U tom modelu aktuator je prikazan crnom kutijom unutar koje se bez gubitaka pohranjuje magnetska energija te obavlja pretvorba energije iz električke u mehaničku. Za definiranje svojstava crne kutije koristi se model linearnog magnetskog kruga. Dobivaju se analitičke funkcije stanja crne kutije. Drugi pristup također koristi elektromehanički model pretvorbe energije, a za definiranje funkcija stanja crne kutije koristi magnetostatički model konačnih elemenata koji se analizira u nizu diskretnih statičkih stanja. Rezultati tih analiza interpoliraju se bikubičnom spline-interpolacijom da bi se dobile glatke funkcije stanja crne kutije. Treći pristup koristi dinamički elektromagnetsko-strukturni model konačnih elemenata s malim pomakom strukture. Analiza ovog modela izravno daje dinamičko ponašanje aktuatora, no on je ograničen malim iznosom pomaka strukture i korištenjem strujne umjesto naponske pobude. Najpotpuniju informaciju i najbolje slaganje s mjerenjima dala je analiza prema drugom pristupu. Analiza prema trećem pristupu bitna je jer jedina daje uvid u dinamičke učinke kao što su vrtložne struje. Ključne riječi: aktuator, elektromehanička pretvorba energije, linearni magnetski krugovi, metoda konačnih elemenata, elektromehanički model pretvorbe energije s koncentriranim parametrima, bikubična spline interpolacija  
520 |a In this thesis, the dynamic behavior of electromechanical actuators is studied. Three approaches are proposed. The first approach utilizes a lumped-parameter electromechanical energy conversion model. The actuator is presented as a black box containing a lossless system which performs the conversion between electrical and mechanical energy. The properties of the black box are derived from a linear magnetic circuit model. The properties are expressed as analytical functions of the state of the black box. The second approach also utilizes the lumped-parameter model, but it derives the properties of the black box from a magnetostatic finite element model which is analyzed in a series of static states. The results of these analyses are interpolated using a bicubic spline interpolation to acquire smooth functions of the black box state. The third approach utilizes a dynamic electromagnetic-structural finite element model with small structural motion. The dynamic behavior is obtained directly by analyzing the model, but the model is limited by small maximum displacement of the moving part and by the application of a current source instead of a voltage source. The most complete information about the dynamic behavior of the actuator is obtained from the second approach. The unique value of the third approach is that it gives information about the dynamic effects such as eddy currents. Keywords: actuator, electromechanical energy conversion, linear magnetic circuit, finite element method, lumped-parameter electromechanical energy conversion model, bicubic spline interpolation  
700 |4 ths  |9 10947  |a Štih, Željko 
942 |c M  |2 udc 
990 |a 16034 
999 |c 14925  |d 14925