Mathematical modelling of diesel engine operational performance parameters in transient modes

This study presents innovative methods for solving practical challenges that occur during the operation of heavy diesel engines (DEs). The novelty of the method arises from the combined use of an artificial neural network, a single-zone DE combustion mathematical model, and data from real operation...

Full description

Permalink: http://skupni.nsk.hr/Record/nsk.NSK01001033068/Details
Matična publikacija: Pomorstvo (Online)
32 (2018), 2 ; str. 165-172
Glavni autori: Rapalis, Paulius (Author), Lebedevas, Sergejus, Mickevičienė, Rima
Vrsta građe: e-članak
Jezik: eng
Predmet:
Online pristup: https://doi.org/10.31217/p.32.2.1
Hrčak
LEADER 02706naa a22003854i 4500
001 NSK01001033068
003 HR-ZaNSK
005 20190722151339.0
006 m d
007 cr||||||||||||
008 190607s2018 ci |o |0|| ||eng
024 7 |2 doi  |a 10.31217/p.32.2.1 
035 |a (HR-ZaNSK)001033068 
040 |a HR-ZaNSK  |b hrv  |c HR-ZaNSK  |e ppiak 
041 0 |a eng  |b eng 
042 |a croatica 
044 |a ci  |c hr 
080 1 |a 621  |2 2011 
080 1 |a 51  |2 2011 
080 1 |a 004  |2 2011 
100 1 |a Rapalis, Paulius  |4 aut  |9 HR-ZaNSK 
245 1 0 |a Mathematical modelling of diesel engine operational performance parameters in transient modes  |h [Elektronička građa] /  |c Paulius Rapalis, Sergejus Lebedevas, Rima Mickevičienė. 
300 |b Ilustr. 
504 |a Bibliografija: 49 jed. 
504 |a Abstract. 
520 |a This study presents innovative methods for solving practical challenges that occur during the operation of heavy diesel engines (DEs). The novelty of the method arises from the combined use of an artificial neural network, a single-zone DE combustion mathematical model, and data from real operation conditions. Using the proposed method, DE transient mode energy efficiency has been analysed, and the primary influencing factors have been identified: qcycl and dqcycl/dt. The adequacy of the method has been tested for CAT3512B-HD series engines installed on freight locomotives. The difference between the model results and experimental data has been 3–4%. CAT3512B-HD series DE transient operation studies have shown that at the low-load range of qcycl (up to 36% of nominal), the fuel consumption during transient operation increases by 10% compared to steady state operation. Transient operation efficiency is not influenced by the operation rate (dqcycl/dt) in the analysed -0.016 to 0.016 g/s range. Near the nominal power (qcycl increases up to 0.5 g/cycle), it is necessary to limit the dqcycl/dt range to 0.006 g/s to avoid overexploitation of the fuel by more than 100%. The proposed method has been recommended for practical use in optimizing vehicle operation load cycle structure by adapting the engine control to the concrete operation conditions, as well as for overall efficiency improvement. 
653 0 |a Dizel motori  |a Matematičko modeliranje  |a Neuronske mreže 
700 1 |a Lebedevas, Sergejus  |4 aut  |9 HR-ZaNSK 
700 1 |a Mickevičienė, Rima  |4 aut  |9 HR-ZaNSK 
773 0 |t Pomorstvo (Online)  |x 1846-8438  |g 32 (2018), 2 ; str. 165-172  |w nsk.(HR-ZaNSK)000663208 
981 |b Be2018  |b B01/18 
998 |b dalo1907 
856 4 0 |u https://doi.org/10.31217/p.32.2.1 
856 4 1 |y Digitalna.nsk.hr 
856 4 0 |u https://hrcak.srce.hr/213304  |y Hrčak