Determination of ballistic properties on ARMOX 500T steel welded joint
In this paper, the effect of different hardness filler materials and sequence of welding on the ballistic performance has been investigated. Also, besides the optimization of the ballistic properties, other mechanical testing was carried out in order to achieve wanted mechanical properties along the...
| Permalink: | http://skupni.nsk.hr/Record/nsk.NSK01001059491/Details |
|---|---|
| Matična publikacija: |
Engineering review (Online) 39 (2019), 2 ; str. 186-196 |
| Glavni autori: | Garašić, Ivica (Author), Jurica, Maja, Iljkić, Dario, inženjer strojarstva, Barišić, Ante, inženjer strojarstva |
| Vrsta građe: | e-članak |
| Jezik: | eng |
| Predmet: | |
| Online pristup: |
https://doi.org/10.30765/er.39.2.8 Hrčak |
| LEADER | 02174naa a22003734i 4500 | ||
|---|---|---|---|
| 001 | NSK01001059491 | ||
| 003 | HR-ZaNSK | ||
| 005 | 20200402183915.0 | ||
| 006 | m d | ||
| 007 | cr|||||||||||| | ||
| 008 | 200325s2019 ci a |o |0|| ||eng | ||
| 024 | 7 | |2 doi |a 10.30765/er.39.2.8 | |
| 035 | |a (HR-ZaNSK)001059491 | ||
| 040 | |a HR-ZaNSK |b hrv |c HR-ZaNSK |e ppiak | ||
| 041 | 0 | |a eng |b eng | |
| 042 | |a croatica | ||
| 044 | |a ci |c hr | ||
| 080 | 1 | |a 621 |2 2011 | |
| 100 | 1 | |a Garašić, Ivica |4 aut | |
| 245 | 1 | 0 | |a Determination of ballistic properties on ARMOX 500T steel welded joint |h [Elektronička građa] / |c Ivica Garašić, Maja Jurica, Dario Iljkić, Ante Barišić. |
| 300 | |b Ilustr. | ||
| 504 | |a Bibliografija: 10 jed. | ||
| 504 | |a Abstract. | ||
| 520 | |a In this paper, the effect of different hardness filler materials and sequence of welding on the ballistic performance has been investigated. Also, besides the optimization of the ballistic properties, other mechanical testing was carried out in order to achieve wanted mechanical properties along the entire welded joint. The experimental work includes macrostructure analysis, ballistic testing, and hardness testing of steel welded joint. The base material used in the experiment were ARMOX® 500T plates. In this experiment 3 different filler materials were used. Based on the testing results, it was found out that best ballistic performance of the welded joint is achieved if capping layer is welded with a hardfacing filler material. This distributes the impact energy to a greater area and transfers it to the lower hardness weld layer underneath which then absorbs the rest of the energy. | ||
| 653 | 0 | |a Čelik |a Zavareni spoj |a Balističke značajke |a Zavarivanje | |
| 700 | 1 | |a Jurica, Maja |4 aut | |
| 700 | 1 | |a Iljkić, Dario, |c inženjer strojarstva |4 aut | |
| 700 | 1 | |a Barišić, Ante, |c inženjer strojarstva |4 aut | |
| 773 | 0 | |t Engineering review (Online) |x 1849-0433 |g 39 (2019), 2 ; str. 186-196 |w nsk.(HR-ZaNSK)000848891 | |
| 981 | |b Be2019 |b B02/19 | ||
| 998 | |b tino2004 | ||
| 856 | 4 | 0 | |u https://doi.org/10.30765/er.39.2.8 |
| 856 | 4 | 0 | |u https://hrcak.srce.hr/218991 |y Hrčak |
| 856 | 4 | 1 | |y Digitalna.nsk.hr |