The effect of mat layers moisture content on some properties of particleboard

In this study, the effect of mat moisture content on the physical and mechanical properties of particleboard was investigated. The experimental boards were produced by using 40 % softwood, 45 % hardwood chips, and 15 % sawdust. The formaldehyde resin/adhesive was used in three-layers (bottom-top lay...

Full description

Permalink: http://skupni.nsk.hr/Record/nsk.NSK01001065051/Details
Matična publikacija: Drvna industrija (Online)
70 (2019), 3 ; str. 221-228
Glavni autori: Istek, Abdullah (Author), Aydin, Ufuk, Ozlusoylu, Ismail
Vrsta građe: e-članak
Jezik: eng
Predmet:
Online pristup: https://doi.org/10.5552/drvind.2019.1821
Hrčak
LEADER 03406naa a22003854i 4500
001 NSK01001065051
003 HR-ZaNSK
005 20200610122845.0
006 m d
007 cr||||||||||||
008 200602s2019 ci ad |o |0|| ||eng
024 7 |2 doi  |a 10.5552/drvind.2019.1821 
035 |a (HR-ZaNSK)001065051 
040 |a HR-ZaNSK  |b hrv  |c HR-ZaNSK  |e ppiak 
041 0 |a eng  |b eng  |b hrv 
042 |a croatica 
044 |a ci  |c hr 
080 1 |a 630  |2 2011 
100 1 |a Istek, Abdullah  |4 aut  |9 HR-ZaNSK 
245 1 4 |a The effect of mat layers moisture content on some properties of particleboard  |h [Elektronička građa] =  |b Utjecaj sadržaja vode u slojevima ploče iverice na njezina svojstva /  |c Abdullah Istek, Ufuk Aydin, Ismail Ozlusoylu. 
246 3 1 |a Utjecaj sadržaja vode u slojevima ploče iverice na njezina svojstva 
300 |b Ilustr. ; graf. prikazi. 
504 |a Bibliografija: 27 jed. 
504 |a Abstract ; Sažetak. 
520 |a In this study, the effect of mat moisture content on the physical and mechanical properties of particleboard was investigated. The experimental boards were produced by using 40 % softwood, 45 % hardwood chips, and 15 % sawdust. The formaldehyde resin/adhesive was used in three-layers (bottom-top layer 12 %, core layer 8 %). Multi-opening press was used during manufacturing the experimental particleboards. The physical and mechanical properties of boards obtained were identified according to the TS-EN standards. The optimum core layer moisture content was determined as 6 % and 7 % according to the results, whereas the moisture content of bottom and top layers was 14 %. Under these moisture content conditions, the bending strength was found to be 13.3 N/mm², the modulus of elasticity in bending 2466 N/mm², and internal bonding strength 0.44 N/mm². The optimum bottom-top layer moisture content was determined to be between 13 % and 15 % and 6.5 % for the core layer. 
520 |a U radu je istraživan utjecaj sadržaja vode u slojevima ploča od sitnjenog drva na njihova fizička i mehanička svojstva. Istraživane su ploče proizvedene od iverja mekog drva u udjelu 45 %, iverja tvrdog drva u udjelu 15 % i drvne prašine u udjelu 15 %. Ploče su se sastojale od tri sloja u kojima je upotrijebljena formaldehidna smola/ljepilo (u vanjskim slojevima 12 %, u središnjim slojevima 8 %), a prešanje je obavljeno višeetažnom prešom. Fizička i mehanička svojstva ploča određena su prema TS-EN normama. Iz dobivenih je rezultata utvrđen optimalan sadržaj vode u središnjem sloju od 6 i 7 %, dok je konstantni sadržaj vode u vanjskim slojevima iznosio 14 %. Pri tim sadržajima vode dobiveni su ovi rezultati: čvrstoća na savijanje 13,3 N/mm2, modul elastičnosti 2466 N/mm2 i međuslojna čvrstoća 0,44 N/mm2. Utvrđeno je da je optimalan sadržaj vode u vanjskim slojevima između 13 i 15 %, a u središnjem sloju 6,5 %. 
653 0 |a Drvne ploče  |a Ploča od usitnjenog drva  |a Sadržaj vode  |a Fizička svojstva  |a Mehanička dvojstva 
700 1 |a Aydin, Ufuk  |4 aut  |9 HR-ZaNSK 
700 1 |a Ozlusoylu, Ismail  |4 aut  |9 HR-ZaNSK 
773 0 |t Drvna industrija (Online)  |x 1847-1153  |g 70 (2019), 3 ; str. 221-228  |w nsk.(HR-ZaNSK)000688399 
981 |b Be2019  |b B03/19 
998 |b tino2006 
856 4 0 |u https://doi.org/10.5552/drvind.2019.1821 
856 4 0 |u https://hrcak.srce.hr/225624  |y Hrčak 
856 4 1 |y Digitalna.nsk.hr