Investigation of friction coefficients of veneers as a function of fibre direction and moisture content
During the manufacture of veneer based moulded parts, veneers move against one another. Friction is caused due to this movement. Different conditions, such as gluing or fibre direction, could influence the friction coefficients and thus the moulding process. For a better understanding of the manufac...
| Permalink: | http://skupni.nsk.hr/Record/nsk.NSK01001065069/Details |
|---|---|
| Matična publikacija: |
Drvna industrija (Online) 70 (2019), 1 ; str. 37-42 |
| Glavni autori: | Buchelt, Beate (Author), Wagenführ, André |
| Vrsta građe: | e-članak |
| Jezik: | eng |
| Predmet: | |
| Online pristup: |
https://doi.org/10.5552/drvind.2019.1806 Hrčak |
| LEADER | 02995naa a22003734i 4500 | ||
|---|---|---|---|
| 001 | NSK01001065069 | ||
| 003 | HR-ZaNSK | ||
| 005 | 20200609111752.0 | ||
| 006 | m d | ||
| 007 | cr|||||||||||| | ||
| 008 | 200602s2019 ci d |o |0|| ||eng | ||
| 024 | 7 | |2 doi |a 10.5552/drvind.2019.1806 | |
| 035 | |a (HR-ZaNSK)001065069 | ||
| 040 | |a HR-ZaNSK |b hrv |c HR-ZaNSK |e ppiak | ||
| 041 | 0 | |a eng |b eng |b hrv | |
| 042 | |a croatica | ||
| 044 | |a ci |c hr | ||
| 080 | 1 | |a 630 |2 2011 | |
| 100 | 1 | |a Buchelt, Beate |4 aut | |
| 245 | 1 | 0 | |a Investigation of friction coefficients of veneers as a function of fibre direction and moisture content |h [Elektronička građa] = |b Istraživanje faktora trenja između furnira kao funkcije smjera protezanja vlakanaca i sadržaja vode / |c Beate Buchelt, André Wagenführ. |
| 246 | 3 | 1 | |a Istraživanje faktora trenja između furnira kao funkcije smjera protezanja vlakanaca i sadržaja vode |
| 300 | |b Graf. prikazi. | ||
| 504 | |a Bibliografija: 9 jed. | ||
| 504 | |a Abstract ; Sažetak. | ||
| 520 | |a During the manufacture of veneer based moulded parts, veneers move against one another. Friction is caused due to this movement. Different conditions, such as gluing or fibre direction, could influence the friction coefficients and thus the moulding process. For a better understanding of the manufacturing process of veneer based moulded parts, it is important to know which parameters influence friction and friction coefficients. In this paper, results of friction investigations are presented. Thereby the moisture content of the used veneers was varied as well as the fibre direction. Considering the manufacture conditions, the investigations were also conducted with glue-coated veneers. The results prove an influence of fibre direction but this influence depends on moisture content. | ||
| 520 | |a Tijekom proizvodnje furnirskih otpresaka furniri se gibaju jedan nasuprot drugome. Zbog toga gibanja nastaje trenje. Različiti uvjeti kao što su lijepljenje i smjer protezanja vlakanaca mogu utjecati na faktor trenja, a time i na proces izrade otpresaka. Za bolje razumijevanje procesa proizvodnje furnirskih otpresaka važno je znati koji čimbenici utječu na trenje i faktor trenja. U ovom su radu prezentirani rezultati istraživanja trenja između furnira. Varirani su sadržaj vode upotrijebljenih furnira, kao i smjer protezanja vlakanaca. Uzimajući u obzir i proizvodne uvjete, istraživanje se provodilo i s furnirima premazanim ljepilom. Rezultati su potvrdili utjecaj smjera protezanja vlakanaca, ali taj utjecaj ovisi o sadržaju vode u furniru. | ||
| 653 | 0 | |a Furnir |a Trenje |a Koeficijent trenja |a Drveni otpresci |a Otpresak | |
| 700 | 1 | |a Wagenführ, André |4 aut | |
| 773 | 0 | |t Drvna industrija (Online) |x 1847-1153 |g 70 (2019), 1 ; str. 37-42 |w nsk.(HR-ZaNSK)000688399 | |
| 981 | |b Be2019 |b B03/19 | ||
| 998 | |b tino2006 | ||
| 856 | 4 | 0 | |u https://doi.org/10.5552/drvind.2019.1806 |
| 856 | 4 | 0 | |u https://hrcak.srce.hr/218204 |y Hrčak |
| 856 | 4 | 1 | |y Digitalna.nsk.hr |