Enhanced abrasion resistance of coated particleboard pre-treated with atmospheric plasma
This study aims to investigate the influence of atmospheric plasma treatment on the abrasion resistance of particleboards, as an example of a wood-based material, coated with a waterborne finish. The treatment of the substrate, prior to coating application, using a floating-electrode dielectric barr...
| Permalink: | http://skupni.nsk.hr/Record/nsk.NSK01001108329/Details |
|---|---|
| Matična publikacija: |
Drvna industrija (Online) 71 (2020), 2 ; str. 129-137 |
| Glavni autori: | Žigon, Jure (Author), Dahle, Sebastian, Petrič, Marko, Pavlič, Matjaž |
| Vrsta građe: | e-članak |
| Jezik: | eng |
| Predmet: | |
| Online pristup: |
https://doi.org/10.5552/drvind.2020.1960 Hrčak |
| LEADER | 03750naa a22003974i 4500 | ||
|---|---|---|---|
| 001 | NSK01001108329 | ||
| 003 | HR-ZaNSK | ||
| 005 | 20210928154534.0 | ||
| 006 | m d | ||
| 007 | cr|||||||||||| | ||
| 008 | 210728s2020 ci d |o |0|| ||eng | ||
| 024 | 7 | |2 doi |a 10.5552/drvind.2020.1960 | |
| 035 | |a (HR-ZaNSK)001108329 | ||
| 040 | |a HR-ZaNSK |b hrv |c HR-ZaNSK |e ppiak | ||
| 041 | 0 | |a eng |b eng |b hrv | |
| 042 | |a croatica | ||
| 044 | |a ci |c hr | ||
| 080 | 1 | |a 67/68 |2 2011 | |
| 100 | 1 | |a Žigon, Jure |4 aut |9 HR-ZaNSK | |
| 245 | 1 | 0 | |a Enhanced abrasion resistance of coated particleboard pre-treated with atmospheric plasma |h [Elektronička građa] = |b Pojačana otpornost na abraziju premazanih iverica prethodno obrađenih atmosferskom plazmom / |c Jure Žigon, Sebastian Dahle, Marko Petrič, Matjaž Pavlič. |
| 246 | 3 | 1 | |a Pojačana otpornost na abraziju premazanih iverica prethodno obrađenih atmosferskom plazmom |
| 300 | |b Graf. prikazi. | ||
| 504 | |a Bibliografija: 41 jed. | ||
| 504 | |a Abstract ; Sažetak. | ||
| 520 | |a This study aims to investigate the influence of atmospheric plasma treatment on the abrasion resistance of particleboards, as an example of a wood-based material, coated with a waterborne finish. The treatment of the substrate, prior to coating application, using a floating-electrode dielectric barrier discharge (FE-DBD) plasma, resulted in an enhanced abrasion resistance of the coated particleboards in comparison to the untreated ones during the abrasion test with a duration of 200 revolutions. This finding was related to lower contact angles of water and coating after treatment with plasma and greater hardness of the coating on the treated substrates. The micrographs of the sample cross sections recorded with scanning electron microscope showed differences in the amounts of remained coating on the abraded areas. Investigation with attenuated total reflection Fourier transform infrared spectroscopy revealed that treatment of the substrate with plasma did not affect the chemical composition nor the curing and structure of the later applied coating. Further studies should be performed to determine the resistance properties of such surface systems to other impacts. | ||
| 520 | |a Cilj ovog rada bio je istražiti utjecaj atmosferske plazme na otpornost iverica na abraziju, kao primjer materijala na bazi drva premazanoga vodenim premazom. Tijekom ispitivanja abrazije u trajanju od 200 ciklusa obrada iverica uz pomoć plazme (FE-DBD) prije nanošenja premaza rezultirala je poboljšanom otpornošću premazanih iverica na abraziju u usporedbi s neobrađenom ivericom. Rezultat istraživanja povezan je s nižim kontaktnim kutom vode i premaznog materijala nakon obrade iverica plazmom i s većom tvrdoćom premaza na podlozi obrađenoj plazmom. Mikrografi je presjeka uzorka dobivene pretražnim elektronskim mikroskopom pokazale su razlike u količini preostalog premaza na površinama ispitanima na otpornost na habanje. Ispitivanje infracrvenom spektroskopijom uz prigušenu totalnu refleksiju pokazalo je da obrada podloge plazmom nije utjecala na kemijski sastav ni na otvrdnjavanje i strukturu kasnije nanesenog premaza. Potrebno je provesti daljnja ispitivanja kako bi se dodatno utvrdila otpornost takvih površinskih sustava. | ||
| 653 | 0 | |a Iverica |a Abrazija |a Zaštitni premaz |a Plazma | |
| 700 | 1 | |a Dahle, Sebastian |4 aut |9 HR-ZaNSK | |
| 700 | 1 | |a Petrič, Marko |4 aut | |
| 700 | 1 | |a Pavlič, Matjaž |4 aut | |
| 773 | 0 | |t Drvna industrija (Online) |x 1847-1153 |g 71 (2020), 2 ; str. 129-137 |w nsk.(HR-ZaNSK)000688399 | |
| 981 | |b Be2020 |b B04/20 | ||
| 998 | |b tino2109 | ||
| 856 | 4 | 0 | |u https://doi.org/10.5552/drvind.2020.1960 |
| 856 | 4 | 0 | |u https://hrcak.srce.hr/238928 |y Hrčak |
| 856 | 4 | 1 | |y Digitalna.nsk.hr |