Electrochemical oxidation of 2,5-dimercapto-1,3,4-thiadiazole on carbon electrodes modified with Ru(III) Schiff base complex
The thiol compound 2,5-dimercapto-1,3,4-thiadiazole is a potential cathode material. The redox reactions of the mentioned thiol compound are slow at room temperature but can be enhanced using electron transfer mediators. The electrochemical oxidation of 2,5-dimercapto-1,3,4-thiadiazole on the surfac...
| Permalink: | http://skupni.nsk.hr/Record/nsk.NSK01001144949/Details |
|---|---|
| Matična publikacija: |
Kemija u industriji (Online) 70 (2021), 7/8 ; str. 401-410 |
| Glavni autor: | Pazalja, Mirha (Author) |
| Vrsta građe: | e-članak |
| Jezik: | eng |
| Predmet: | |
| Online pristup: |
https://doi.org/10.15255/KUI.2020.068 Kemija u industriji (Online) Hrčak |
| LEADER | 04365naa a22003614i 4500 | ||
|---|---|---|---|
| 001 | NSK01001144949 | ||
| 003 | HR-ZaNSK | ||
| 005 | 20221209145600.0 | ||
| 006 | m d | ||
| 007 | cr|||||||||||| | ||
| 008 | 220803s2021 ci a |o |0|| ||eng | ||
| 024 | 7 | |2 doi |a 10.15255/KUI.2020.068 | |
| 035 | |a (HR-ZaNSK)001144949 | ||
| 040 | |a HR-ZaNSK |b hrv |c HR-ZaNSK |e ppiak | ||
| 041 | 0 | |a eng |b hrv | |
| 042 | |a croatica | ||
| 044 | |a ci |c hr | ||
| 080 | 1 | |a 54 |2 2011 | |
| 100 | 1 | |a Pazalja, Mirha |4 aut |9 HR-ZaNSK | |
| 245 | 1 | 0 | |a Electrochemical oxidation of 2,5-dimercapto-1,3,4-thiadiazole on carbon electrodes modified with Ru(III) Schiff base complex |h [Elektronička građa] / |c Mirha Pazalja. |
| 300 | |b Graf. prikazi. | ||
| 504 | |a Bibliografija: 31 jed. | ||
| 504 | |a Abstract ; Sažetak. | ||
| 520 | |a The thiol compound 2,5-dimercapto-1,3,4-thiadiazole is a potential cathode material. The redox reactions of the mentioned thiol compound are slow at room temperature but can be enhanced using electron transfer mediators. The electrochemical oxidation of 2,5-dimercapto-1,3,4-thiadiazole on the surface of carbon electrodes modified with Ruthenium(III) Schiff base complex was studied by voltammetric methods and amperometric flow injection analysis. The electrocatalytic properties of Ruthenium(III) Schiff base complex on glassy carbon and screen printed carbon electrodes are enhanced by the addition of multi-walled carbon nanotubes and Nafion. Voltammetric studies showed that anodic oxidation of DMcT on a modified glassy carbon electrode occurs at a potential of +0.28 V vs. Ag/AgCl in Britton-Robinson buffer (pH 6.50). Flow injection amperometric measurements were performed at +0.20 V vs. Ag/AgCl in Britton-Robinson buffer solutions pH 6.50 at a 0.40 cm3 min–1 flow rate. The results of amperometric measurements for modified screen printed and glassy carbon electrodes showed that the screen printed electrode had a lower value of detection limit (0.38 mg dm–3) and quantification (1.28 mg dm–3), and a linear dynamic range from 1 to 500 mg dm–3 of 2,5-dimercapto-1,3,4-thiadiazole. Modified glassy carbon electrode provided a linear dynamic range up to 750 mg dm–3 of 2,5-dimercapto-1,3,4-thiadiazole with a detection limit of 3.90 mg dm–3 and quantification of 13.20 mg dm–3. | ||
| 520 | |a 2,5-dimerkapto-1,3,4-tiadiazol (DMcT) je tiolni spoj i potencijalni katodni materijal. Redoks-reakcije navedenog tiolnog spoja sporo se odvijaju pri sobnoj temperaturi, ali se mogu ubrzati upotrebom medijatora za prijenos elektrona. Elektrokemijska oksidacija DMcT na površini ugljikovih elektroda modificiranih rutenijevim(III) kompleksom sa Schiffovim bazama, ispitana je voltametrijskim metodama i amperometrijskom analizom s injektiranjem u protok. Elektrokatalitička svojstva rutenij(III) kompleksa sa Schiffovim bazama na elektrodi od staklastog ugljika i printanoj ugljikovoj elektrodi poboljšana su dodavanjem višeslojnih ugljikovih nanocjevčica i Nafiona. Voltametrijska ispitivanja pokazala su da se anodna oksidacija DMcT na modificiranoj elektrodi od staklastog ugljika odvija na potencijalu od +0,28 V u odnosu na Ag/AgCl u Britton-Robinsonovom puferu (pH 6,50). Amperometrijska mjerenja provedena su na +0,20 V u odnosu na Ag/AgCl u Britton-Robinson puferu pH 6,50 pri brzini protoka od 0,40 cm3 min–1. Rezultati amperometrijskih mjerenja, za modificiranu elektrodu od staklastog ugljika i printanu ugljikovu elektrodu, pokazali su da printana ugljikova elektroda ima nižu vrijednost granice detekcije (0,38 mg dm–3) i kvantifikacije (1,28 mg dm–3) te linearni dinamički raspon od 1 do 500 mg dm–3 DMcT. Modificirana elektroda od staklastog ugljika pokazala je linearni dinamički raspon do 750 mg dm–3 za DMcT, granicu detekcije 3,90 mg dm–3 i kvantifikacije 13,20 mg dm–3. | ||
| 653 | 0 | |a Elektrokemijska oksidacija |a Ugljikove elektrode |a Voltametrija |a Amperometrijska analiza |a Ugljikove nanocjevčice | |
| 773 | 0 | |t Kemija u industriji (Online) |x 1334-9090 |g 70 (2021), 7/8 ; str. 401-410 |w nsk.(HR-ZaNSK)000530475 | |
| 981 | |b Be2021 |b B03/21 | ||
| 998 | |b tino2212 | ||
| 856 | 4 | 0 | |u https://doi.org/10.15255/KUI.2020.068 |
| 856 | 4 | 0 | |u http://silverstripe.fkit.hr/kui/arhiva-brojeva/article/806 |y Kemija u industriji (Online) |
| 856 | 4 | 1 | |y Digitalna.nsk.hr |
| 856 | 4 | 0 | |u https://hrcak.srce.hr/259343 |y Hrčak |