Slika naslovnice

Wood quality characterization of sycamore maple (Acer pseudoplatanus L.) and its utilization in wood products industries

This study quantified the physical and mechanical properties of sycamore maple (Acer pseudoplatanus L.) as a basis for assessing wood quality. The physical properties of oven-dry density, density at 12% MC, green density, basic density, longitudinal, radial, tangential and volumetric shrinkages were...

Full description

Permalink: http://skupni.nsk.hr/Record/nsk.NSK01001145156/Details
Matična publikacija: Croatian journal of forest engineering (Online)
42 (2021), 3 ; str. 543-560
Glavni autori: Sedlar, Tomislav (Author), Šefc, Bogoslav, Stojnić, Srđan, Sinković, Tomislav
Vrsta građe: e-članak
Jezik: eng
Predmet:
Gorski javor > Acer pseudoplatanus > Kvaliteta drva > Drvna industrija
Online pristup: https://doi.org/10.5552/crojfe.2021.1099
Hrčak
LEADER 03270naa a22003854i 4500
001 NSK01001145156
003 HR-ZaNSK
005 20230120140938.0
006 m d
007 cr||||||||||||
008 220803s2021 ci a |o |0|| ||eng
024 7 |2 doi  |a 10.5552/crojfe.2021.1099 
035 |a (HR-ZaNSK)001145156 
040 |a HR-ZaNSK  |b hrv  |c HR-ZaNSK  |e ppiak 
042 |a croatica 
044 |a ci  |c hr 
080 1 |a 630  |2 2011 
080 1 |a 67/68  |2 2011 
100 1 |a Sedlar, Tomislav  |4 aut 
245 1 0 |a Wood quality characterization of sycamore maple (Acer pseudoplatanus L.) and its utilization in wood products industries  |h [Elektronička građa] /  |c Tomislav Sedlar, Bogoslav Šefc, Srđan Stojnić, Tomislav Sinković. 
300 |b Ilustr. 
500 |a Prilozi na str. 556-559. 
504 |a Bibliografija: str. 553-555. 
504 |a Abstract. 
520 |a This study quantified the physical and mechanical properties of sycamore maple (Acer pseudoplatanus L.) as a basis for assessing wood quality. The physical properties of oven-dry density, density at 12% MC, green density, basic density, longitudinal, radial, tangential and volumetric shrinkages were tested and the mechanical properties of bending strength, modulus of elasticity at bending, compression strength parallel to grain and compression strength in radial and tangential direction as well as of Brinell hardness on the cross, radial, and tangential section were determined. Five sycamore maple trees from Medvednica region were selected for the purposes of this research. The results were compared with known literature data on sycamore maple wood, beech wood from the same sight, and beech wood from Gorski Kotar region. For a better understanding of sycamore maple physiology, as well as for assessing the quality of wood products, the distribution of wood properties within the tree radius, from pith to bark, was investigated. There was a general bell shaped distribution, in the radial direction, in wood density, and mechanical properties of sycamore maple wood. Shrinkages decreased from pith to bark, except for tangential shrinkage with bell shaped pattern. All investigated wood densities of sycamore maple from Medvednica were similar to the findings of studies known in literature, as well as shrinkages, except for the lower longitudinal shrinkage. Investigated mechanical properties of sycamore maple wood were similar to the findings of studies known in literature, except for the lower bending strength and modulus of elasticity (MOE). Investigated sycamore maple indicated better dimensional stability than beech wood from two locations in the region, although it did not match the beech wood regarding mechanical properties, especially wood hardness. 
653 0 |a Gorski javor  |a Acer pseudoplatanus  |a Kvaliteta drva  |a Drvna industrija 
700 1 |a Šefc, Bogoslav  |4 aut 
700 1 |a Stojnić, Srđan  |4 aut 
700 1 |a Sinković, Tomislav  |4 aut 
773 0 |t Croatian journal of forest engineering (Online)  |x 1848-9672  |g 42 (2021), 3 ; str. 543-560  |w nsk.(HR-ZaNSK)000843366 
981 |b Be2021  |b B03/21 
998 |b tino2301 
856 4 0 |u https://doi.org/10.5552/crojfe.2021.1099 
856 4 0 |u https://hrcak.srce.hr/262272  |y Hrčak 
856 4 1 |y Digitalna.nsk.hr 

Slični primjerci