Suitability of Recycled PLA Filament Application in Fused Filament Fabrication Process

Fused filament fabrication (FFF) is currently one of the most popular additive manufacturing processes due to its simplicity and low running and material costs. Support structures, which are necessary for overhanging surfaces during production, in most cases need to be manually removed and as such,...

Full description

Permalink: http://skupni.nsk.hr/Record/nsk.NSK01001163054/Details
Matična publikacija: Tehnički glasnik (Online)
15 (2021), 4 ; str. 491-497
Glavni autori: Breški, Tomislav (Author), Hentschel, Lukas, Godec, Damir, Đuretek, Ivica
Vrsta građe: e-članak
Jezik: eng
Online pristup: https://doi.org/10.31803/tg-20210805120621
Elektronička verzija članka
Elektronička verzija članka
LEADER 02066naa a22003614i 4500
001 NSK01001163054
003 HR-ZaNSK
005 20230213103931.0
006 m d
007 cr||||||||||||
008 230213s2021 ci |o |0|| ||eng
024 7 |2 doi  |a 10.31803/tg-20210805120621 
035 |a (HR-ZaNSK)001163054 
040 |a HR-ZaNSK  |b hrv  |c HR-ZaNSK  |e ppiak 
041 0 |a eng 
042 |a croatica 
044 |a ci  |c hr 
080 1 |2 2011 
100 1 |a Breški, Tomislav  |4 aut  |9 HR-ZaNSK 
245 1 0 |a Suitability of Recycled PLA Filament Application in Fused Filament Fabrication Process  |h [Elektronička građa]  |c Tomislav Breški, Lukas Hentschel, Damir Godec, Ivica Đuretek. 
300 |b Ilustr. 
504 |a Bibliografija: 
504 |a Summary. 
520 |a Fused filament fabrication (FFF) is currently one of the most popular additive manufacturing processes due to its simplicity and low running and material costs. Support structures, which are necessary for overhanging surfaces during production, in most cases need to be manually removed and as such, they become waste material. In this paper, experimental approach is utilised in order to assess suitability of recycling support structures into recycled filament for FFF process. Mechanical properties of standardized specimens made from recycled polylactic acid (PLA) filament as well as influence of layer height and infill density on those properties were investigated. Optimal printing parameters for recycled PLA filaments are determined with Design of Experiment methods (DOE). 
700 1 |a Hentschel, Lukas  |4 aut  |9 HR-ZaNSK 
700 1 |a Godec, Damir  |4 aut  |9 HR-ZaNSK 
700 1 |a Đuretek, Ivica  |4 aut  |9 HR-ZaNSK 
773 0 |t Tehnički glasnik (Online)  |x 1848-5588  |g 15 (2021), 4 ; str. 491-497  |w nsk.(HR-ZaNSK)000810940 
981 |b Be2021 
856 4 0 |u https://doi.org/10.31803/tg-20210805120621 
856 4 0 |u https://hrcak.srce.hr/264998  |y Elektronička verzija članka 
856 4 0 |u https://hrcak.srce.hr/file/384691  |y Elektronička verzija članka 
856 4 1 |y Digitalna.nsk.hr