|
|
|
|
LEADER |
13720cam a22013694i 4500 |
001 |
ZAG01000547040 |
003 |
HR-ZaZAG |
005 |
20131112110330.0 |
006 |
aadfof 1 |
007 |
ta |
008 |
120928s20122012ci adfofr 1 hrv |
020 |
|
|
|a 9789532920260
|
035 |
|
|
|9 (HR-ZaNSK)000818101
|
035 |
|
|
|a (HR-ZaZAG)000547040
|
040 |
|
|
|a HR-ZaSFS
|b hrv
|c HR-ZaSFS
|e ppiak
|
041 |
0 |
|
|a eng
|
042 |
|
|
|a Croatica
|
044 |
|
|
|a ci
|b hr
|c 3166-2:HR
|
080 |
|
|
|a 674 (GFDC)
|
080 |
|
|
|a (063)
|
111 |
2 |
|
|a International Scientific Conference Wood is Good: With Knowdlege and Technology to a Competitive Forestry and Wood Technology Sector
|n (23 ;
|d 2012 ;
|c Zagreb)
|
210 |
1 |
|
|a Wood is good
|
245 |
1 |
0 |
|a Wood is good - with knowledge and technology to a competitive forestry and wood technology sector :
|b Proceedings /
|c 23rd International Scientific Conference, Zagreb, 12th of October 2012 ; [Editor-in-Chief Ivica Grbac].
|
250 |
|
|
|a Naklada: 200 primjeraka
|
260 |
|
|
|a Zagreb :
|b Faculty of Forestry,
|c 2012.
|
300 |
|
|
|a X, 246 str. :
|b ilustr., tablice, grafički prikazi ;
|c 30 cm.
|
490 |
1 |
|
|a Međudržavna savjetovanja Zavoda za istraživanja u drvnoj industriji Šumarskog fakulteta Sveučilišta u Zagrebu
|
500 |
|
|
|a Na vrhu nasl. str.: University of Zagreb Faculty of Forestry [i] Zagreb Fair Innovawood. Na dnu nasl. str.: ambienta
|
500 |
|
|
|a Organizers: InnovaWood, Faculty of Forestry University of Zagreb, Wood Science and Technology Department Biotechnical Faculty Ljubljana University, Craotian Zagreb Fair , Croatian Forestry Society, Slovenian Association of Wood Technologists, The Scientific Council for Agriculture and Forestry Croatian Academy of Sciences and Arts, Croatian Academy of Engineering, Croatian Academy of Forestry, Croatian Chamber of Engineers of Forestry and Wood Technology.
|
500 |
|
|
|a Predgovor (Foreword): Ivica Grbac i Goran Mihulja.
|
504 |
|
|
|a Bibliografija uz svaki znanstveni rad
|
504 |
|
|
|a Sežetak s ključnim riječima uz svaki znanstveni rad.
|
508 |
|
|
|a Editor in Chief: Ivica Grbac. Editors: Goran Mihulja, Stjepan Pervan, Miljenko Klarić. Organizing committee: Marian Babiak, Christian Brischke, Mariano Perez Campos, Damir Felak, Ivica Grbac, Miha Humar, Ivan Ištok, Vassil Jivkov, Petar Jurjević, Borut Kričej, Trajče Manev, Assia Marinova, Božica Marković, Slavko Matić, Milan Oršanić, Marko Petrič, Andreas Rapp, Goran Rubin, Jerzy Smardzewski, Stanko Tonković, Milan Trbojević, Gus Verhaeghe, Dijana Vuletić. Programme commitee and reviewers: Andrija Bogner, Stanislaw Dziegielewski, Ivica Grbac, Vladimir Jambreković, Vlatka Jiruš-Rajković, Vassil Jivkov, Boris Ljuljka, Goran Mihulja, Marko Petrić, Andreas Rapp, Milan Šernek, Ivica Župčić.
|
650 |
|
7 |
|a Industrija namještaja
|v Zbornik znanstvenih radova
|z Republika Hrvatska
|
650 |
|
7 |
|a Drvna industrija
|v Zbornik znanstvenih radova
|z Republika Hrvatska
|
650 |
|
7 |
|a ZIDI
|z Šumarski fakultet Sveučilišta u Zagrebu
|
760 |
0 |
|
|t Međudržavna savjetovanja Zavoda za istraživanja u drvnoj industriji Šumarskog fakulteta Sveučilišta u Zagrebu
|
730 |
0 |
|
|a Istraživanja u drvnoj industriji
|
700 |
1 |
2 |
|a Basarac Sertić, Martina
|t The impact of macroeconomic factors on export dynamics in wood processing.
|
700 |
1 |
2 |
|a Čavlović, Ankica
|t The amount of pollutions from biomass combustion in Croatian wood production.
|
700 |
1 |
2 |
|a Beljo-Lučić, Ružica
|t The amount of pollutions from biomass combustion in Croatian wood production.
|
700 |
1 |
2 |
|a Jug, Matija
|t The amount of pollutions from biomass combustion in Croatian wood production.
|
700 |
1 |
2 |
|a Domljan, Danijela
|t New concepts and approaches to design of contemporary school furniture.
|
700 |
1 |
2 |
|a Vlaović, Zoran
|t New concepts and approaches to design of contemporary school furniture. The influence of subjects gender, mass, height and body mass index on pressures and comfort during seating on office chairs.
|
700 |
1 |
2 |
|a Grbac, Ivica
|t Foreword. New concepts and approaches to design of contemporary school furniture. Experimental determination of elastic constants of veneer composities. The influence of subjects gender, mass, height and body mass index on pressures and comfort during seating on office chairs. Research corner joints in furniture corpus.
|
700 |
1 |
2 |
|a Jajčinović, Marina
|t New concepts and approaches to design of contemporary school furniture.
|
700 |
1 |
2 |
|a Hrovatin, Jasna
|t Experiences as a competitive challenge for the future.
|
700 |
1 |
2 |
|a Vižintin, Jože
|t Experiences as a competitive challenge for the future.
|
700 |
1 |
2 |
|a Humar, Miha
|t Performance of the cooper treated, and naturaly durable wood in laboratory and outdoor conditions.
|
700 |
1 |
2 |
|a Nejc, Thaler
|t Performance of the cooper treated, and naturaly durable wood in laboratory and outdoor conditions.
|
700 |
1 |
2 |
|a Jirouš-Rajković, Vlatka
|t New insights into improving the colour stability of thermally modified wood exposed to UV-light.
|
700 |
1 |
2 |
|a Miklečić, Josip
|t New insights into improving the colour stability of thermally modified wood exposed to UV-light.
|
700 |
1 |
2 |
|a Živkov, Vasil
|t Strenght properties of new lightweight panels for furniture. Stiffness coefficients under bending test of t-shape corner joints of frame structural elements with crossection 50x30mm made of sweet chesnut wood. Comparative research on bending moments of t-shape corner joints from beech wood with cross section of 50x25mm.
|
700 |
1 |
2 |
|a Simeonova, Ralica
|t Strenght properties of new lightweight panels for furniture.
|
700 |
1 |
2 |
|a Kamenov, Petko
|t Strenght properties of new lightweight panels for furniture.
|
700 |
1 |
2 |
|a Marinova, Asja
|t Strenght properties of new lightweight panels for furniture. Stiffness coefficients under bending test of t-shape corner joints of frame structural elements with crossection 50x30mm made of sweet chesnut wood.
|
700 |
1 |
2 |
|a Kamperidou, Vasiliki
|t Effect of thermal treatment on colour and hygroscopic properties of poplar wood.
|
700 |
1 |
2 |
|a Barboutis, Ioannis
|t Effect of thermal treatment on colour and hygroscopic properties of poplar wood.
|
700 |
1 |
2 |
|a Klarić, Miljenko
|t Oxidative discolouration of Alder-wood (Alnus spp.) during hydrothermal processing.
|
700 |
1 |
2 |
|a Pervan, Stjepan
|t Oxidative discolouration of Alder-wood (Alnus spp.) during hydrothermal processing. Accelerated ageing of floorings made from thermally treated ash.
|
700 |
1 |
2 |
|a Prekrat, Silvana
|t Oxidative discolouration of Alder-wood (Alnus spp.) during hydrothermal processing. Production of construction documentation with three-dimenzional modelling. Modelling of thin paper honeycomb panels for furniture.
|
700 |
1 |
2 |
|a Brezović, Mladen
|t Oxidative discolouration of Alder-wood (Alnus spp.) during hydrothermal processing.
|
700 |
1 |
2 |
|a Biošić, Dražen
|t Oxidative discolouration of Alder-wood (Alnus spp.) during hydrothermal processing.
|
700 |
1 |
2 |
|a Klos, Robert
|t Analysis of human needs on kitchen design for people with visual impairment.
|
700 |
1 |
2 |
|a Fabisiak, Beata
|t Analysis of human needs on kitchen design for people with visual impairment.
|
700 |
1 |
2 |
|a Kaczmarek, Michał
|t Analysis of human needs on kitchen design for people with visual impairment.
|
700 |
1 |
2 |
|a Krystofiak, Tomasz
|t Nanotechnology - system for optimization properties of lacquer coatings in woodworking industry.
|
700 |
1 |
2 |
|a Lis, Barbara
|t Nanotechnology - system for optimization properties of lacquer coatings in woodworking industry.
|
700 |
1 |
2 |
|a Proszyk, Stanislaw
|t Nanotechnology - system for optimization properties of lacquer coatings in woodworking industry.
|
700 |
1 |
2 |
|a Kyuchuckov, Georgi
|t Stiffness coefficients under bending test of t-shape corner joints of frame structural elements with crossection 50x30mm made of sweet chesnut wood. Comparative research on bending moments of t-shape corner joints from beech wood with cross section of 50x25mm.
|
700 |
1 |
2 |
|a Gruevski, Gjorgi
|t Stiffness coefficients under bending test of t-shape corner joints of frame structural elements with crossection 50x30mm made of sweet chesnut wood.
|
700 |
1 |
2 |
|a Kjučukov, Borislav
|t Stiffness coefficients under bending test of t-shape corner joints of frame structural elements with crossection 50x30mm made of sweet chesnut wood. Comparative research on bending moments of t-shape corner joints from beech wood with cross section of 50x25mm.
|
700 |
1 |
2 |
|a Mitani, Andromachi
|t Assessment of color changes and hygroscopis properties of beech (Fagus sylvatica) wood after thermal modification.
|
700 |
1 |
2 |
|a Barboutis, Ioannis
|t Assessment of color changes and hygroscopis properties of beech (Fagus sylvatica) wood after thermal modification.
|
700 |
1 |
2 |
|a Moro, Maja
|t Trends in foreign trade exchange on the Croatian furniture market for period 2000.-2011 . Promotional activities: link in the chain of activities in achieving competitive advantage.
|
700 |
1 |
2 |
|a Motik, Darko
|t Trends in foreign trade exchange on the Croatian furniture market for period 2000.-2011 . Promotional activities: link in the chain of activities in achieving competitive advantage.
|
700 |
1 |
2 |
|a Šegotić, Ksenija
|t Trends in foreign trade exchange on the Croatian furniture market for period 2000.-2011.
|
700 |
1 |
2 |
|a Pirc, Andreja
|t Trends in foreign trade exchange on the Croatian furniture market for period 2000.-2011 . Promotional activities: link in the chain of activities in achieving competitive advantage.
|
700 |
1 |
2 |
|a Oblak, Leon
|t Trends in foreign trade exchange on the Croatian furniture market for period 2000.-2011.
|
700 |
1 |
2 |
|a Nestorović, Biserka
|t Experimental determination of elastic constants of veneer composities.
|
700 |
1 |
2 |
|a Nestorović, Predrag
|t Experimental determination of elastic constants of veneer composities.
|
700 |
1 |
2 |
|a Gorišek, Željko
|t Accelerated ageing of floorings made from thermally treated ash.
|
700 |
1 |
2 |
|a Straže, Aleš
|t Accelerated ageing of floorings made from thermally treated ash.
|
700 |
1 |
2 |
|a Kričej, Borut
|t Accelerated ageing of floorings made from thermally treated ash.
|
700 |
1 |
2 |
|a Jelačić, Denis
|t Promotional activities: link in the chain of activities in achieving competitive advantage.
|
700 |
1 |
2 |
|a Kafka, Robert
|t Promotional activities: link in the chain of activities in achieving competitive advantage.
|
700 |
1 |
2 |
|a Švec, Jurica
|t Production of construction documentation with three-dimenzional modelling.
|
700 |
1 |
2 |
|a Šefc, Bogoslav
|t Modification of wood with halogenide free organophosporous agent.
|
700 |
1 |
2 |
|a Trajković, Jelena
|t Modification of wood with halogenide free organophosporous agent.
|
700 |
1 |
2 |
|a Ištok, Iva
|t Modification of wood with halogenide free organophosporous agent.
|
700 |
1 |
2 |
|a Hasan, Marin
|t Modification of wood with halogenide free organophosporous agent.
|
700 |
1 |
2 |
|a Flinčec Grgac, Sandra
|t Modification of wood with halogenide free organophosporous agent.
|
700 |
1 |
2 |
|a Glad, Lana
|t Modification of wood with halogenide free organophosporous agent.
|
700 |
1 |
2 |
|a Smardzewski, Jerzy
|t Modelling of thin paper honeycomb panels for furniture.
|
700 |
1 |
2 |
|a Španić, Nikola
|t Biometrics and bio composite materials.
|
700 |
1 |
2 |
|a Jambreković, Vladimir
|t Biometrics and bio composite materials.
|
700 |
1 |
2 |
|a Antonović, Alan
|t Biometrics and bio composite materials.
|
700 |
1 |
2 |
|a Štaba, Silvestar
|t Biometrics and bio composite materials.
|
700 |
1 |
2 |
|a Tankut, Ali Naci
|t Creep perfomance of ready to assemble (RTA) fasteners in bookcase construction.
|
700 |
1 |
2 |
|a Tankut, Nurgul
|t Creep perfomance of ready to assemble (RTA) fasteners in bookcase construction.
|
700 |
1 |
2 |
|a Karaman, Abdurrahman
|t Creep perfomance of ready to assemble (RTA) fasteners in bookcase construction.
|
700 |
1 |
2 |
|a Gojak, Ivica
|t The influence of subjects gender, mass, height and body mass index on pressures and comfort during seating on office chairs.
|
700 |
1 |
2 |
|a Sekovanić, Irena
|t The influence of subjects gender, mass, height and body mass index on pressures and comfort during seating on office chairs.
|
700 |
1 |
2 |
|a Salopek, Marko
|t The influence of subjects gender, mass, height and body mass index on pressures and comfort during seating on office chairs.
|
700 |
1 |
2 |
|a Živković, Vjekoslav,
|c inženjer drvne tehnologije
|t Spectral sensitivity of fir wood surface under xenon light exposure.
|
700 |
1 |
2 |
|a Arnold, Martin
|t Spectral sensitivity of fir wood surface under xenon light exposure.
|
700 |
1 |
2 |
|a Richter, Klaus
|t Spectral sensitivity of fir wood surface under xenon light exposure.
|
700 |
1 |
2 |
|a Turkulin, Hrvoje
|t Spectral sensitivity of fir wood surface under xenon light exposure.
|
700 |
1 |
2 |
|a Župčić, Ivica
|t Research corner joints in furniture corpus.
|
700 |
1 |
2 |
|a Hadžić, Damir,
|c liječnik
|t Research corner joints in furniture corpus.
|
700 |
1 |
2 |
|a Bogner, Andrija
|t Research corner joints in furniture corpus.
|
LKR |
|
|
|a UP
|b 000535080(SFS)
|l ZAG01
|m International Scientific Conference Wood is Good: With Knowdlege and Technology to a Competitive Forestry and Wood Technology Sector
|n Međudržavna savjetovanja Zavoda za istraživanja u drvnoj industriji Šumarskog fakulteta Sveučilišta u Zagrebu
|r 7600
|
OWN |
|
|
|a SUM
|
852 |
|
|
|a Šumarski fakultet
|b ŠDK
|l I.B. ŠK 14/2012-17/2012
|
PLK |
|
|
|a UP
|l ZAG01
|b 000535080
|m International Scientific Conference Wood is Good: With Knowdlege and Technology to a Competitive Forestry and Wood Technology Sector
|n Nakladnička cjelina: Međudržavna savjetovanja Zavoda za istraživanja u drvnoj industriji Šumarskog fakulteta Sveučilišta u Zagrebu
|