Hybrid seven-bar press mechanism
An optimization study with kinetostatic analysis is performed on hybrid seven-bar press mechanism. This study is based on previous studies performed on planar hybrid seven-bar linkage. Dimensional synthesis is performed, and optimum link lengths for the mechanism are found. Optimization study is per...
| Permalink: | http://skupni.nsk.hr/Record/nsk.NSK01001024870/Details |
|---|---|
| Matična publikacija: |
Tehnički glasnik (Online) 12 (2018), 3 ; str. 181-187 |
| Glavni autori: | Kütük, M. Erkan (Author), Artan, Murat, Dülger, L. Canan |
| Vrsta građe: | e-članak |
| Jezik: | eng |
| Predmet: | |
| Online pristup: |
https://doi.org/10.31803/tg-20180203202102 Hrčak |
| LEADER | 02160naa a22003614i 4500 | ||
|---|---|---|---|
| 001 | NSK01001024870 | ||
| 003 | HR-ZaNSK | ||
| 005 | 20191127161051.0 | ||
| 006 | m d | ||
| 007 | cr|||||||||||| | ||
| 008 | 190321s2018 ci a |o |0|| ||eng | ||
| 024 | 7 | |2 doi |a 10.31803/tg-20180203202102 | |
| 035 | |a (HR-ZaNSK)001024870 | ||
| 040 | |a HR-ZaNSK |b hrv |c HR-ZaNSK |e ppiak | ||
| 041 | 0 | |a eng |b eng | |
| 042 | |a croatica | ||
| 044 | |a ci |c hr | ||
| 080 | 1 | |a 621 |2 2011 | |
| 100 | 1 | |a Kütük, M. Erkan |4 aut |9 HR-ZaNSK | |
| 245 | 1 | 0 | |a Hybrid seven-bar press mechanism |h [Elektronička građa] : |b link optimization and kinetostatic analysis / |c M. Erkan Kütük, Murat Artan, L. Canan Dülger. |
| 300 | |b Ilustr. | ||
| 504 | |a Bibliografija: 16 jed. | ||
| 504 | |a Abstract. | ||
| 520 | |a An optimization study with kinetostatic analysis is performed on hybrid seven-bar press mechanism. This study is based on previous studies performed on planar hybrid seven-bar linkage. Dimensional synthesis is performed, and optimum link lengths for the mechanism are found. Optimization study is performed by using genetic algorithm (GA). Genetic Algorithm Toolbox is used with Optimization Toolbox in MATLAB®. The design variables and the constraints are used during design optimization. The objective function is determined and eight precision points are used. A seven-bar linkage system with two degrees of freedom is chosen as an example. Metal stamping operation with a dwell is taken as the case study. Having completed optimization, the kinetostatic analysis is performed. All forces on the links and the crank torques are calculated on the hybrid system with the optimized link lengths. | ||
| 653 | 0 | |a Hibridni mehanizam |a Genetski algoritam |a Kinetostatička analiza |a Sinteza mehanizma | |
| 700 | 1 | |a Artan, Murat |4 aut |9 HR-ZaNSK | |
| 700 | 1 | |a Dülger, L. Canan |4 aut |9 HR-ZaNSK | |
| 773 | 0 | |t Tehnički glasnik (Online) |x 1848-5588 |g 12 (2018), 3 ; str. 181-187 |w nsk.(HR-ZaNSK)000810940 | |
| 981 | |b Be2018 |b B02/18 | ||
| 998 | |b tino1911 | ||
| 856 | 4 | 0 | |u https://doi.org/10.31803/tg-20180203202102 |
| 856 | 4 | 1 | |y Digitalna.nsk.hr |
| 856 | 4 | 0 | |u https://hrcak.srce.hr/206055 |y Hrčak |